Salivary Analysis for Evidence based Ayurvedic Diagnosis

Ayurveda is called Mother of all medical sciences. It's the oldest therapeutic and medicinal treatment invented in ancient India. Ayurveda or Ayurvedic treatment is bit different from modern medical science. It believes in Nadi Pariksha and many subjective parameters are included to start diagnosis of disease. Whereas modern medical science has different approach of disease diagnosis. It utilizes different tools and testing to diagnose a disease effectively. Saliva analysis is already accepted in modern medical as an important bio-substance, as we see in COVID-19, but not in ayurveda. This paper shows how salivary analysis can act as an evidential proof for diagnosing a disease, in the ayurvedic way. The salivary contents can be analyzed use various biosensors. One of these is Surface Enhanced Raman Spectroscopy (SERS) platform. It allows molecular detection in bio fluids like saliva, sweat, urine, etc. The saliva analysis using SERS technique will help to detect various trace level molecules which is likely to assist the Ayurvedic diagnosis more accurately and dependency on subjective parameters will reduce to evaluate patient's condition. © 2023 IEEE.

The CRISPR/Cas System: A Customizable Toolbox for Molecular Detection.

Clustered regularly interspaced short palindromic repeats (CRISPR) and their associated proteins (Cas) are promising molecular diagnostic tools for rapidly and precisely elucidating the structure and function of genomes due to their high specificity, programmability, and multi-system compatibility in nucleic acid recognition. Multiple parameters limit the ability of a CRISPR/Cas system to detect DNA or RNA. Consequently, it must be used in conjunction with other nucleic acid amplification techniques or signal detection techniques, and the reaction components and reaction conditions should be modified and optimized to maximize the detection performance of the CRISPR/Cas system against various targets. As the field continues to develop, CRISPR/Cas systems have the potential to become an ultra-sensitive, convenient, and accurate biosensing platform for the detection of specific target sequences. The design of a molecular detection platform employing the CRISPR/Cas system is asserted on three primary strategies: (1) Performance optimization of the CRISPR/Cas system; (2) enhancement of the detection signal and its interpretation; and (3) compatibility with multiple reaction systems. This article focuses on the molecular characteristics and application value of the CRISPR/Cas system and reviews recent research progress and development direction from the perspectives of principle, performance, and method development challenges to provide a theoretical foundation for the development and application of the CRISPR/CAS system in molecular detection technology.

[Advantages and limitations of COVID-19 detection techniques].

The occurrence and persistent pandemic of 2019 coronavirus pneumonia (COVID-19), caused by the infection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has taken a big toll on global public health. The development of virus detection techniques and its application played an important role in health management, including screening, identification and treatment of patients, and slowing down the spread of virus. This review briefly summarizes the biological characteristics of SARS-CoV-2, and introduces in detail the SARS-CoV-2 detection techniques developed and used worldwide. Perspectives on the follow-up development of virus detection techniques were presented, with the aim to facilitate medical diagnosis, public health protection, disease prevention and control.

Molecular detection of SARS-CoV-2 in Argentina: Evaluation of alternative diagnostic tools for the decentralization of the diagnosis.

The rocketing number of COVID-19 cases highlighted the critical role that diagnostic tests play in medical and public health decision-making to contain and mitigate the SARS-CoV-2 pandemic. This study reports the evaluation and implementation of different tests for the molecular detection of SARS-CoV-2 in the central region of Argentina. We evaluated 3 real time RT-PCR kits (GeneFinder COVID-19 Plus RealAmp Kit, DisCoVery SARS-CoV-2 RT-PCR Detection Kit and WGene SARS-CoV-2 RT Detection), 2 nucleic acid extraction methods [MagaBio plus Virus DNA/RNA Purification Kit II (BioFlux), 35-min vs. 9-min], a pre-analytical reagent (FlashPrep®) and 2 isothermal amplification tests (Neokit Plus and ELA CHEMSTRIP®). The order according to the best performance of the 3 real-time RT-PCR kits evaluated was: DisCoVery>GeneFinderTM>WGene. The 2 RNA extraction methods showed similar good results: MagaBio plus Virus RNA Purification Kit II (BioFlux) 9-min was selected due to its faster performance. FlashPrep® reagent showed excellent results to perform direct RNA detection. Isothermal amplification assays showed acceptable sensitivity and specificity values (>80%), except in samples with Ct>30. Our data show optimal real time RT-PCR kits and alternative molecular methods for SARS-CoV-2 diagnostic. These alternative assays proved to be acceptable for their use in adverse contexts, decentralization, and different epidemiological scenarios, for rapid and accurate SARS-CoV-2 detection.

[CRISPR-based molecular diagnostics: a review].

Rapid and accurate detection technologies are crucial for disease prevention and control. In particular, the COVID-19 pandemic has posed a great threat to our society, highlighting the importance of rapid and highly sensitive detection techniques. In recent years, CRISPR/Cas-based gene editing technique has brought revolutionary advances in biotechnology. Due to its fast, accurate, sensitive, and cost-effective characteristics, the CRISPR-based nucleic acid detection technology is revolutionizing molecular diagnosis. CRISPR-based diagnostics has been applied in many fields, such as detection of infectious diseases, genetic diseases, cancer mutation, and food safety. This review summarized the advances in CRISPR-based nucleic acid detection systems and its applications. Perspectives on intelligent diagnostics with CRISPR-based nucleic acid detection and artificial intelligence were also provided.

COVID-19 diagnostics: Molecular biology to nanomaterials.

The SARS-CoV-2 pandemic has claimed around 6.4 million lives worldwide. The disease symptoms range from mild flu-like infection to life-threatening complications. The widespread infection demands rapid, simple, and accurate diagnosis. Currently used methods include molecular biology-based approaches that consist of conventional amplification by RT-PCR, isothermal amplification-based techniques such as RT-LAMP, and gene editing tools like CRISPR-Cas. Other methods include immunological detection including ELISA, lateral flow immunoassay, chemiluminescence, etc. Radiological-based approaches are also being used. Despite good analytical performance of these current methods, there is an unmet need for less costly and simpler tests that may be performed at point of care. Accordingly, nanomaterial-based testing has been extensively pursued. In this review, we discuss the currently used diagnostic techniques for SARS-CoV-2, their usefulness, and limitations. In addition, nanoparticle-based approaches have been highlighted as another potential means of detection. The review provides a deep insight into the current diagnostic methods and future trends to combat this deadly menace.

Molecular detection and identification of fungal pathogens infections occurring in COVID-19 recovered patients.

The major outbreak of Corona virus disease COVID-19 caused by SARS-CoV-2 had brought about 4.55 million deaths and had shaken the health care system all over the world. From the year 2020 the recovered COVID-19 patients had started to develop microbial infection, most predominantly fungal infection in which Mucormycosis gained immediate attention as it has worsen the mortality rate in humans. In the present study of 53 COVID-19 recovered patients presented with microbial infection, the analysis of frequency distribution of fungal infection preponderantly with Rhizopus oryzae, followed by Aspergillus and Candida species.

An RT-PCR Assay for Detection of Infectious Bronchitis Coronavirus Serotypes

Avian infectious bronchitis virus (IBV), a chicken Gammacoronavirus, is a major poultry pathogen, and is probably endemic in all regions with intensive poultry production. Since IBV was first described in 1936, many serotypes and variants of IBV have been isolated worldwide. IBV isolates are capable of infecting a large range of epithelial surfaces of the chicken, involving the respiratory, renal, and reproductive systems;however, the clinical signs are usually not specific for differential diagnoses. Virus isolation is commonly used for diagnosis of IBV infection, which was achieved through passage of clinical materials via the allantoic route of embryos. Currently, more sensitive molecular approaches for the detection of avian pathogens have been developed, including reverse-transcriptase polymerase chain reaction (RT-PCR) and real-time RT-PCR, which are more suitable for use in diagnostic laboratories. In this chapter, we describe a one-step RT-PCR which can be used for detecting most of IBV serotypes in the IBV-infected allantoic fluid and has been used routinely in our laboratories for detection of IBVs. Copyright © Springer Science+Business Media New York 2016.

Real-Time RT-PCR Detection of Equine Coronavirus

Equine coronavirus (ECoV) is a recently identified equine virus, involved mainly in enteric infections. Since the ECoV discovery in 1999, only two real-time RT-PCRs have been developed for viral identification. In this chapter we describe a one-step real-time RT-PCR that has been routinely used in our laboratory for ECoV detection from fecal and respiratory samples. Copyright © Springer Science+Business Media New York 2016.

Bats-associated beta-coronavirus detection and characterization: First report from Pakistan.

Bats remains as reservoirs for highly contagious and pathogenic viral families including the Coronaviridae, Filoviridae, Paramyxoviruses, and Rhabdoviridae. Spill over of viral species (SARS-CoV, MERS-CoV & SARS-CoV2) from bats (as a possible potential reservoirs) have recently caused worst outbreaks. Early detection of viral species of pandemic potential in bats is of great importance. We detected beta coronaviruses in the studied bats population (positive samples from Rousettus leschenaultia) and performed the evolutionary analysis, amino acid sequence alignment, and analysed the 3-Dimentional protein structure. We detected the coronaviruses for the first time in bats from Pakistan. Our analysis based on RdRp partial gene sequencing suggest that the studied viral strains are closely related to MERS-CoV-like viruses as they exhibit close structure similarities (with few substitutions) and also observed a substitution in highly conserved SDD in the palm subdomain of motif C to ADD, when compared with earlier reported viral strains. It could be concluded from our study that coronaviruses are circulating among the bat's population in Pakistan. Based on the current findings, we suggest large scale screening procedures of bat virome across the country to detect potential pathogenic viral species.

Comparison of analytical sensitivity of SARS-CoV-2 molecular detection kits.

OBJECTIVES: Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection has had a significant impact on global public health systems, making nucleic acid detection an important tool in epidemic prevention and control. Detection kits based on real-time reverse transcriptase PCR (rRT-PCR) have been used widely in clinics, but their analytical sensitivity (limit of detection, LOD) remains controversial. Moreover, there is limited research evaluating the analytical sensitivity of other molecular detection kits. METHODS: In this study, armored ribonucleic acid reference materials developed in-house were used to evaluate the analytical sensitivity of SARS-CoV-2 detection kits approved by the National Medical Products Administration. These were based on rRT-PCR and other molecular detection assays. RESULTS: The percentage retesting required with rRT-PCR kits was as follows: 0%, 7.69%, 15.38%, and 23.08% for samples with concentrations ranging from 50 000 to 781 copies/ml. In total, 93% of rRT-PCR kits had a LOD <1000 copies/ml. Only one kit had an LOD >1000 copies/ml. The LOD of other molecular detection kits ranged from 68 to 2264 copies/ml. CONCLUSIONS: The study findings can help pharmaceutical companies optimize and improve detection kits, guide laboratories in selecting kits, and assist medical workers in their daily work.

Dataset from the comparative evaluation of the STANDARD M10 point-of-care analyzer versus the NeuMoDx assay for the molecular diagnosis of SARS-CoV-2.

The STANDARD M10 is a novel cartridge-based real time RT-PCR point of care platform that provides significant advantages regarding SARS-CoV-2 detection including fast turnaround times and no need for specialized personnel and facilities. This assay was recently evaluated in our hospital as a rapid alternative to the already present NeuMoDx assay that is used in everyday practice. For this purpose, 30 nasopharyngeal samples by patients admitted to our hospital were used, regardless of clinical suspicion of COVID-19. In our evaluation, the sensitivity of STANDARD M10 was 95%, the specificity was 100%, the positive predictive value was 100%, the negative predictive value was 90% and the kappa coefficient of agreement was 0.927 (p < 0.001).

Simultaneous Detection of SARS-CoV-2 and Influenza Virus in Wastewater of Two Cities in Southeastern Germany, January to May 2022.

Dependent on the excretion pattern, wastewater monitoring of viruses can be a valuable approach to characterizing their circulation in the human population. Using polyethylene glycol precipitation and reverse transcription-quantitative PCR, the occurrence of RNA of SARS-CoV-2 and influenza viruses A/B in the raw wastewater of two treatment plants in Germany between January and May 2022 was investigated. Due to the relatively high incidence in both exposal areas (plant 1 and plant 2), SARS-CoV-2-specific RNA was determined in all 273 composite samples analyzed (concentration of E gene: 1.3 × 104 to 3.2 × 106 gc/L). Despite a nation-wide low number of confirmed infections, influenza virus A was demonstrated in 5.2% (concentration: 9.8 × 102 to 8.4 × 104 gc/L; plant 1) and in 41.6% (3.6 × 103 to 3.0 × 105 gc/L; plant 2) of samples. Influenza virus B was detected in 36.0% (7.2 × 102 to 8.5 × 106 gc/L; plant 1) and 57.7% (9.6 × 103 to 2.1 × 107 gc/L; plant 2) of wastewater samples. The results of the study demonstrate the frequent detection of two primary respiratory viruses in wastewater and offer the possibility to track the epidemiology of influenza by wastewater-based monitoring.

Pulmonary tuberculosis screening in emigrants and travellers: A retrospective analysis of Guangzhou Port in China.

BACKGROUND: China is beginning to transform from a migrant exporting country to a migrant importing country. Our study aimed to assess risks of imported tuberculosis among travellers and to determine risk factors, to tailor institutional guidelines. METHODS: We conducted an observational, retrospective, population-based cohort study. Molecular epidemiology surveillance methods were used to screen travellers for cases of pulmonary tuberculosis (PTB) at Guangzhou Port in China from January 2010 to December 2016. RESULTS: A total of 165,369 travellers from 190 countries and regions were screened for PTB. The rate of suspected PTB, laboratory confirmed rate, and the total detection rate in emigrants were significantly higher than those in travellers (p<0.01). There were four differences in the PTB screening process between emigrants and travellers. According to the transmission risk degree of the tuberculosis, forty high-risk PTB importing countries were divided into five levels. The travellers diagnosed with PTB were significantly younger than the emigrants (p<0.01). The distribution of genotypes differed significantly between the travellers and emigrants (p<0.001). CONCLUSIONS: PTB screening process in travellers at ports should include a risk assessment of high-risk groups. It should reduce diagnosis time by rapid molecular detection methods and strengthen drug resistant (DR) transmission and monitoring of imported PTB strains through molecular genotyping at ports.

Impact of Fast SARS-CoV-2 Molecular Point-Of-Care Testing on Patients' Length of Stay in an Emergency Department.

The ID NOW COVID-19 system (IDNOW) is a point-of-care test (POCT) providing results within 15 min. We evaluated the impact of IDNOW use on patient length of stay (LOS) in an emergency department (ED). In the ED of Saint-Louis Hospital, Paris, France, adult patients requiring a rapid diagnosis of SARS-CoV-2 were tested with Cepheid Xpert Xpress SARS-CoV-2 or FilmArray respiratory panel RP2 in the virology laboratory between 18 October and 3 November 2020 (period 1) and with IDNOW between 4 November and 30 November 2020 (period 2). A total of 676 patients participated in the study, 337 during period 1 and 339 during period 2. The median LOS in ED was significantly higher in period 1 than in period 2 (276 versus 208 min, P < 0.0001). More patients spent less than 4 h in the ED in period 2 (61.3%) than in period 1 (38.3%) (P < 0.0001). By univariate analysis, factors associated with ED LOS were hypertension, anosmia/ageusia, number of patients per day, and ID NOW implementation in period 2. By multivariate analysis, the period of testing remained significantly associated with ED LOS. Rapid molecular SARS-CoV-2 POCT was associated with a reduced LOS for patients admitted to an ED. IMPORTANCE During COVID-19 pandemic upsurges, emergency departments had to deal with a massive flow of incoming patients. The need for COVID-19 infection status determination before medical ward admission worsened ED overcrowding. The development of molecular point-of-care testing gave new opportunities for getting faster results of SARS-CoV-2 genome detection 24 h a day. In our study, we show, with a multivariate analysis, that the use of the POCT COVID-19 IDNOW reduced the ED length of stay by 1 h. The rate of patients who waited less than 4 h in the ED increased significantly. Our study highlights the benefit of COVID-19 molecular POCT for preventing ED overcrowding and facilitating bed allocation and SARS-CoV-2-infected patient isolation.

Types and Applications of Nicking Enzyme-Combined Isothermal Amplification.

Due to the sudden outbreak of COVID-19 at the end of 2019, rapid detection has become an urgent need for community clinics and hospitals. The rapid development of isothermal amplification detection technology for nucleic acids in the field of molecular diagnostic point-of-care testing (POCT) has gained a great deal of attention in recent years. Thanks to intensive research on nicking enzymes, nicking enzyme-combined isothermal amplification has become a promising platform for rapid detection. This is a novel technique that uses nicking enzymes to improve ordinary isothermal amplification. It has garnered significant interest as it overcomes the complexity of traditional molecular diagnostics and is not subject to temperature limitations, relying on cleavage enzymes to efficiently amplify targets in a very short time to provide a high level of amplification efficiency. In recent years, several types of nicking enzyme-combined isothermal amplification have been developed and they have shown great potential in molecular diagnosis, immunodiagnosis, biochemical identification, and other fields. However, this kind of amplification has some disadvantages. In this review, the principles, advantages and disadvantages, and applications of several nicking enzyme-combined isothermal amplification techniques are reviewed and the prospects for the development of these techniques are also considered.

SARS-CoV-2 Diagnostics Based on Nucleic Acids Amplification: From Fundamental Concepts to Applications and Beyond.

COVID-19 pandemic ignited the development of countless molecular methods for the diagnosis of SARS-CoV-2 based either on nucleic acid, or protein analysis, with the first establishing as the most used for routine diagnosis. The methods trusted for day to day analysis of nucleic acids rely on amplification, in order to enable specific SARS-CoV-2 RNA detection. This review aims to compile the state-of-the-art in the field of nucleic acid amplification tests (NAATs) used for SARS-CoV-2 detection, either at the clinic level, or at the Point-Of-Care (POC), thus focusing on isothermal and non-isothermal amplification-based diagnostics, while looking carefully at the concerning virology aspects, steps and instruments a test can involve. Following a theme contextualization in introduction, topics about fundamental knowledge on underlying virology aspects, collection and processing of clinical samples pave the way for a detailed assessment of the amplification and detection technologies. In order to address such themes, nucleic acid amplification methods, the different types of molecular reactions used for DNA detection, as well as the instruments requested for executing such routes of analysis are discussed in the subsequent sections. The benchmark of paradigmatic commercial tests further contributes toward discussion, building on technical aspects addressed in the previous sections and other additional information supplied in that part. The last lines are reserved for looking ahead to the future of NAATs and its importance in tackling this pandemic and other identical upcoming challenges.

VPipe: an Automated Bioinformatics Platform for Assembly and Management of Viral Next-Generation Sequencing Data.

Next-generation sequencing (NGS) is a powerful tool for detecting and investigating viral pathogens; however, analysis and management of the enormous amounts of data generated from these technologies remains a challenge. Here, we present VPipe (the Viral NGS Analysis Pipeline and Data Management System), an automated bioinformatics pipeline optimized for whole-genome assembly of viral sequences and identification of diverse species. VPipe automates the data quality control, assembly, and contig identification steps typically performed when analyzing NGS data. Users access the pipeline through a secure web-based portal, which provides an easy-to-use interface with advanced search capabilities for reviewing results. In addition, VPipe provides a centralized system for storing and analyzing NGS data, eliminating common bottlenecks in bioinformatics analyses for public health laboratories with limited on-site computational infrastructure. The performance of VPipe was validated through the analysis of publicly available NGS data sets for viral pathogens, generating high-quality assemblies for 12 data sets. VPipe also generated assemblies with greater contiguity than similar pipelines for 41 human respiratory syncytial virus isolates and 23 SARS-CoV-2 specimens. IMPORTANCE Computational infrastructure and bioinformatics analysis are bottlenecks in the application of NGS to viral pathogens. As of September 2021, VPipe has been used by the U.S. Centers for Disease Control and Prevention (CDC) and 12 state public health laboratories to characterize >17,500 and 1,500 clinical specimens and isolates, respectively. VPipe automates genome assembly for a wide range of viruses, including high-consequence pathogens such as SARS-CoV-2. Such automated functionality expedites public health responses to viral outbreaks and pathogen surveillance.

Recent advances in research on biointerfaces: From cell surfaces to artificial interfaces.

Biointerfaces are regions where biomolecules, cells, and organic materials are exposed to environmental media or come in contact with other biomaterials, cells, and inorganic/organic materials. In this review article, six research topics on biointerfaces are described to show examples of state-of-art research approaches. First, biointerface design of nanoparticles for molecular detection is described. Functionalized gold nanoparticles can be used for sensitive detection of various target molecules, including chemical compounds and biomolecules, such as DNA, proteins, cells, and viruses. Second, the interaction between bacterial cell surfaces and material surfaces, including the introduction of advances in analytical methods and theoretical calculations, are explained as well as their applications to bioprocesses. Third, bioconjugation technologies for localizing functional proteins at biointerfaces are introduced, in particular, by focusing the potential of enzymes as a catalytic tool for designing different types of bioconjugates that function at biointerfaces. Forth topics is focusing on lipid-protein interaction in cell membranes as natural biointerfaces. Examples of membrane lipid engineering are introduced, and it is mentioned how their compositional profiles affect membrane protein functions. Fifth topic is the physical method for molecular delivery across the biointerface being developed currently, such as highly efficient nanoinjection, electroporation, and nanoneedle devices, in which the key is how to perforate the cell membrane. Final topic is the chemical design of lipid- or polymer-based RNA delivery carriers and their behavior on the cell interface, which are currently attracting attention as RNA vaccine technologies targeting COVID-19. Finally, future directions of biointerface studies are presented.

Standardization of the method of concentration and extraction of nucleic acids in wastewater samples: a low-cost tool to be used in epidemiological surveillance of SARS-CoV-2

Sewage quality surveillance can represent a complementary tool for monitoring infectious diseases and preventing epidemic outbreaks, especially when the capacity for clinical testing is limited. Thus, the present study describes the technical details of a low-cost method for concentrating and extracting nucleic acids from sewage samples, as a preliminary step for the detection of viruses and other pathogens. To validate the proposed methodology, after the concentration and extraction steps, the presence of the SARS coronavirus-2 (COVID-19) in the samples was analyzed using real-time polymerase chain reaction. The virus' ribonucleic acid was detected in 80% of the sewage samples analyzed, proving the success of the methodological procedure adopted. The early detection of a pathogen associated with the work of multidisciplinary teams allows the practice of epidemiological surveillance, which assists in making decisions about One Health - an inseparable union between animal, human, and environmental health.